Whirlpool & Maintenance Heater: The pump is rated 1 hp, UL listed, self-draining, with a safety suction assembly to protect against body or hair entrapment. It is mounted under the integral seat, features chrome jets and controls, and the heater is connected “in-line” with the pump. It has A 16” square removable wall panel for future access to both pump and heater. If the unit has no seat or a different location is preferred, both the pump and heater are shipped loose with an extra hose for connection. Either way, the pump with heater will always be accessible should they ever require servicing. Both the pump and heater have plug-in style electric cords, and each requires a separate 115VAC, single phase, 60Hz GFCI protected branch circuit, and 15Amp. Both units will require a #12 wire. The 6032 model features five adjustable jets. The 6032-S model features six adjustable jets. The 6042 Extra Wide model features seven adjustable jets.

Matching Acrylic Wall: The one-piece wall surround with no seams measures 53-3/4” high plus a top flange of 1-1/2” to fit on top of the bathtub. It contains a shelf 34” long and 4-1/2” deep for soap/shampoo use, and is not predrilled for a valve so as to allow a choice of location on site. It is shipped factory assembled to the bathtub as a one-piece unit or unassembled with hardware supplied, at the Client’s option.

Matching Acrylic Dome: For installation on top of the wall surround for that “finished look,” the total height of the walls and dome is 63-1/4”. It is factory assembled or shipped as a separate piece with hardware supplied, at the Client’s option.

Full Bathtub Skirt for “Stand Alone” Configuration: If access is required on three sides, a full skirt encloses the bathtub on all four sides for a finished look. Both end skirts contain an easy removable panel (heavy duty Velcro) for accessibility which measures 23-1/2” long by 12-1/8” high on the 6032 and 6032-S models, and measures 31-1/4” long by 13” high on the Wide-Body model.

Portable Bathtub: All models are available for operation in a portable manner, by the addition of a concealed aluminum frame with four heavy-duty castor wheels. When used in this manner, the total height from the floor to the top of the threshold is 5”.

Mixing Valve: A fast fill thermostatic controlled high capacity (15GPM) valve is available and is recommended for use in the Low-Rise models, since the bather must enter the bathtub before filling it. This will permit a fill rate of approximately four minutes. It allows for pressure changes, features a factory set lever handle rotation limit stop, and a check stop to facilitate maintenance.

Waterfall Filler: A waterfall filler allows for a more pleasurable and soothing experience for the bather, as opposed to the use of a traditional water spout. It is mounted in the back wall of the bathtub, and plumbed to the drain end with a stub for water connection using "PVC schedule 40" piping. An anti-siphon brass valve (ANSI certified) is supplied for easier installation.

Rim Mounted Hand Held Shower Wand & Diverter: Is generally preferred when the bathtub requires access on three sides. It is factory installed with a connection to the drain end, and has a five foot hose with an adjustable shower head.

Waste & Overflow: A one-piece system with chrome casings. It is ideal for use in the Low-Rise series due to higher than standard overflow location. It is not factory installed to permit the installer latitude when making the waste connection.

Decorator Colors: Standard colors are White or Bone/Almond. There are twenty-seven other decorator colors available.

Assist Bars: Made of thermoplastic. They will not peel, chip, crack, or rust. They measure 1-1/4” diameter, and are only available in white or bone/almond colors. The package consists of two 24” bars for a horizontal location on the back wall, and one 24” bar for a vertical location on a side wall. If a movable hand held shower wand is required, it is attached to a bar, and it is factory installed if ordered with a wall surround.

Specifications and Options subject to change.